Custom mount bracket with FreeCAD

The TP Link outdoor camera comes already equipped with a flexible mounting solution: can be screwed in if a flat wood surface is provided, can be placed directly and attached with the magnet or can be installed with a mounting screw. Sometimes it needs to be mounted on a round bar.... for this some kind of adapter is needed.

Using FreeCAD such adapter is very easily designed and 3d printed. There are two parts with a hinge and a tightening screw. This solution seems to be a very practical way of mounting the TP Link camera.

The most relevant dimensions are defined by the mounting bar diameter and by the mounting plate provided by TP Link.

Once the bracket is printed in two parts it can be fastened with the screws and for the hinge ideally a brass insert can be used.

Design files can be found on Thingiverse.