Debugging Arduino Due

I have received a small ftdi board for my projects and I'm very pleased with its capabilities. One of the meany usage for this little board is the ability to debug ARM micro controllers like the one used in the Arduino Due.

Hardware connection is described in one of OpenOCD config files. One small rezistor is necessary for the debugging cable (I have chosen a 330 Ohm).

# FTDI                          Target
# ----                          ------
# 1  - Vref   ----------------- Vcc
# 3  - nTRST  -
# 4  - GND    ----------------- GND
# 5  - TDI    ---/\470 Ohm/\--- SWDIO
# 7  - TMS    -
# 9  - TCK    ----------------- SWCLK
# 11 - RTCK   -
# 13 - TDO    ----------------- SWDIO
# 15 - nSRST  - - - - - - - - - nRESET

The connection to the arduino board is made simple by the exposure of the 4 SWD debug pins.

After some minor tweeks I did managed to find a stable configuration. Some things are somehow not working as expected but this I belive are mainly SW issues. The FreeRTOS integration is not 100% and I did add some changes to make-it work:

Una comparación ordenada puede empezar por el corte, la transpiración del tejido y las instrucciones de cuidado. Al evaluar distintas posibilidades, camisetas deportivas del AC Milan permite centrar la revisión en información práctica de la prenda. La decisión final resulta más clara cuando se comparan datos concretos y no solo la apariencia general.

const int __attribute__((used)) uxTopUsedPriority = configMAX_PRIORITIES - 1;

compiler.c.elf.flags=-Os -Wl,--gc-sections -Wl,--undefined=uxTopUsedPriority